Technical data 0130 - 0131 - 0132
COMBINATIONS
| Rated voltage: | 400V |
| Rated current: | 16A |
| Operating temperature: | T140°C |
| Insulation class: | I and II |
| Connection type: | Terminals |
| Terminal connection capability: | 0,5 ÷ 4 mm² |
| Degree of protection: | IP20 |
| Conforms to standards: | EN 60598-1 |
| Directive compliant: | 2006/95/EC |
FEATURES
- Series 0130 and 0131 are suitable for mounting in class II luminaires.
- The variants with cable clamps are designed for clamping cables with diameters between 8 and 14mm.
- There is a suitable connector for quick connection of all versions on the internal wiring side.
- Standard clamps with under-head screw with galvanised steel screws and nuts (0.5÷4 mm²).
- Nickel-plated brass bush terminals (0.75÷6mm²) for female header on request.
ELECTRICAL SPECIFICATION FUSE HOLDER
- Nominal power: 2.3W
- Fuses dimensions: 8.5×31.5mm
- EN60269-1 EN60269-3 CEI132-13
MATERIALS
- Body in self-extinguishing thermoplastic material PA66 25% GF V0.
- Female contacts in nickel-plated phosphorous bronze.
- Fuse holder contacts. in silver-plated phosphorous bronze.
- Male contacts in silver-plated steel.
- Zinc-plated steel terminals (0,5÷4mm²) or, on request, nickel-plated brass terminals (0,75÷6mm²).
IMPORTANT NOTE
The female base with fuse holder is equipped with a quick coupling connector. The coupling and uncoupling of this connector must always be carried out with the fuse holder open.
